BX-Burn IR (1064 nm)

The formula for BX-Burn not only enhances engraving on  steels and chrome plated steel it is also highly effective when using an IR (1064 nm) laser.  BX-Burn will not only generate a deeper burn, but this effect can be used to double the speed of engraving on aluminum, titanium and zinc plated items.  A noticeable difference can been seen up to 200 mm/s engraving speed.

Without BX-Burn

6 micron depth @ 40 mm/s on .002 inch thick aluminum business card

With BX-Burn

13 micron depth @ 40 mm/s on .002 inch thick aluminum business card

Without BX-Burn

1.5 micron depth @ 80 mm/s on .002 inch thick aluminum business card 

With BX-Burn

5 micron depth @ 80 mm/s on .002 inch thick aluminum business card 

3/8 thick aluminum plate 80 mm/s without BX-Burn

1 micron depth 

3/8 thick aluminum plate 80 mm/s with BX-Burn


3 microns deep 

Zinc Plated Steel without BX-Burn

3 microns depth @ 80 mm/s

Zinc Plated Steel with BX-Burn

6 microns depth @ 80 mm/s

200 mm/s without BX Burn

200 mm/s with BX-Burn

Titanium 100 mm/s with BX-Burn

100 mm/s without BX- Burn

Left image with BX-Burn on titanium 

Right image without BX-Burn on titanium